Wired Intelligent Edge

 View Only
last person joined: 20 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Rx error (oversize) on AP switch ports ARUBA CX

This thread has been viewed 25 times

  • 1.  Rx error (oversize) on AP switch ports ARUBA CX

    Posted Jun 30, 2022 09:08 AM
    Hello team,
    At one of our client side ,we are getting tx (oversize) error on AP ports. I have changed the MTU size to 9198 on access switch interface and on core switch i have done ip MTU 9198 on interface vlan .But still after sometime I am getting same error on every AP switch ports.
    I will be very grateful if someone can help me with this issue.

    Thanks,


  • 2.  RE: Rx error (oversize) on AP switch ports ARUBA CX

    EMPLOYEE
    Posted Aug 03, 2022 09:28 AM
    In order to assure jumbo frame can be used you need to implement it end-to-end including controller/gateway, uplink ports etc. Also firewall on the controller should accept jumbo frames.
    Original Message


  • 3.  RE: Rx error (oversize) on AP switch ports ARUBA CX

    EMPLOYEE
    Posted Aug 09, 2022 06:51 AM

    Hello Shivam,

    have you tried to play with the MTU on the AP side (if the problem still persist of course)? 

    https://community.arubanetworks.com/blogs/esupport1/2020/05/11/giant-packets-on-switch-port-connected-to-access-point


    Original Message