Wired Intelligent Edge

 View Only
last person joined: 2 days ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Configure port controlled-direction via SNMP

This thread has been viewed 17 times

  • 1.  Configure port controlled-direction via SNMP

    Posted Aug 16, 2022 08:24 AM
    Hi community! 

    I am using 2540 48G Aruba switches on the latest firmware.

    Does anybody know if there is an OID for configuring "aaa port-access controlled-direction" port setting via SNMP. 

    Thx in advance!


  • 2.  RE: Configure port controlled-direction via SNMP
    Best Answer

    EMPLOYEE
    Posted Aug 16, 2022 02:24 PM
    Hello, 

    Please try dot1xAuthAdminControlledDirections  from the IEEE 802.1X MIB.
    https://www.ieee802.org/1/files/public/MIBs/802-1x-2001-mib.txt
    Numerical value is 1.0.8802.1.1.1.1.2.1.1.3

    ....

    dot1xAuthAdminControlledDirections OBJECT-TYPE
    SYNTAX PaeControlledDirections
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The current value of the administrative controlled
    directions parameter for the Port."
    REFERENCE
    "9.4.1, Admin Control Mode"
    ::= { dot1xAuthConfigEntry 3 }
    ...

    From what I see on the switch value 0 means controlled-direction both and 1 -in.
    Original Message


  • 3.  RE: Configure port controlled-direction via SNMP

    Posted Aug 17, 2022 01:44 AM
    That's it! Thank you very much!


    Original Message