As I see, WLCs clustering is the preferable Aruba design at this moment.
How can I set priority per WLC to make WLC1 as primary in the cluster and WLC2 as secondary ? (I need to swap primary and secondary in my design)
#show lc-cluster group-membership
Cluster Enabled, Profile Name = "p-cluster"
Redundancy Mode On
Active Client Rebalance Threshold = 50%
Standby Client Rebalance Threshold = 75%
Unbalance Threshold = 5%
Heartbeat Threshold = 2000 msec
AP Load Balancing: Enabled
Active AP Rebalance Threshold = 20%
Active AP Unbalance Threshold = 5%
Active AP Rebalance AP Count = 50
Active AP Rebalance Timer = 1 minutes
Cluster Info Table
------------------
Type IPv4 Address Priority Connection-Type STATUS
---- --------------- -------- --------------- ------
self 10.15.244.70 128 N/A CONNECTED (Member)
peer 10.15.244.71 128 L2-Connected CONNECTED (Leader)