I have 3 x IAP 225 RW
i want to set them up so that
1 is the Master and the others are Slaves
All have the Same SSID on 2.4 and 5 Ghz
to cover our house where the Walls have insulation installed that has an Aluminium sheet on one side
This is blocking any RF passing through
AP are already mounted running POE + 51x @ 1.1amps to each AP
any guidance to chieve seamless Wifi would be appreciated
TVs and other small devices to use 2.4 and phones / tablets to use 5Ghz
Thanks in advance