Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Storm Control in CX switches

This thread has been viewed 23 times

  • 1.  Storm Control in CX switches

    Posted Jun 08, 2023 04:36 PM

    Hi community!

    I can't find any documentation for Storm Control in the CX switches. I'm now suspecting is not supported!?

    Regards!



  • 2.  RE: Storm Control in CX switches

    Posted Jun 08, 2023 08:54 PM

    rate-limit could be what you're looking for, it's in the CX QOS guide

    https://www.arubanetworks.com/techdocs/AOS-CX/10.10/PDF/qos_6200-6300-6400.pdf

    https://www.arubanetworks.com/techdocs/AOS-CX/10.10/PDF/qos_832x-10000.pdf


    Original Message


  • 3.  RE: Storm Control in CX switches

    EMPLOYEE
    Posted Jun 09, 2023 07:12 AM

    Strom-Control is included in the feature fault-monitor which can be found in the security guide.


    Original Message


  • 4.  RE: Storm Control in CX switches

    Posted Jun 09, 2023 05:27 PM

    Thank you Holger!


    Original Message


  • 5.  RE: Storm Control in CX switches

    Posted Sep 24, 2023 11:18 PM

    The fault-monitor actions you can take are to log the event or block the port which could be rather extreem. It seems if you want visability of possible fault conditions but not block ports you'd have to instead apply a per port rate-limit <boardcast|multicast|unkown|icmp> and use fault-monitor just to inform you something is going on.

    It would be nice if fault monitor allowed you to rate limit rather than just block.


    Original Message