Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

Syslog and Logging - Aruba 8325 to Syslog server

This thread has been viewed 13 times

  • 1.  Syslog and Logging - Aruba 8325 to Syslog server

    Posted Feb 28, 2024 12:28 PM

    Hi there we are using Solarwinds to view logging and sflow data from our Aruba 8325 cores but it is not showing up in Solarwinds. However all other switches (Aruba 6300M) are. Any idea what the issue could be? Thanks

    sflow
    sflow collector 172.18.3.66 port 2055
    sflow agent-ip 172.27.1.253

    logging 172.18.1.4

    logging 172.18.3.66

    logging 172.18.3.69

    logging facility local2



  • 2.  RE: Syslog and Logging - Aruba 8325 to Syslog server

    Posted Feb 28, 2024 12:46 PM

    Without any knowledge of your network:

    Would your environment require you to specifically configure Syslog to a particular VRF and then also to a particular interface?



    ------------------------------
    If my post was useful, please Accept Solution and Give Kudos.
    ------------------------------
    Zak Chalupka
    Principal Engineer - HPE Aruba
    ACDX | ACMP | ACSP | ACCP
    wifizak@hpe.com
    ------------------------------
    Ideas expressed here are solely my own and not necessarily that of HPE Aruba.
    ------------------------------

    Original Message


  • 3.  RE: Syslog and Logging - Aruba 8325 to Syslog server

    Posted Feb 28, 2024 12:52 PM

    Hi there
     I'm just trying to get the syslogs and logging information to the syslog server. Is there a guide or anything I need to follow?


    Original Message


  • 4.  RE: Syslog and Logging - Aruba 8325 to Syslog server

    Posted Feb 28, 2024 01:05 PM

    There are two components to my original thoughts here:

    Look through below document. Specifically the "Remote syslog commands" and the VRF parameter.

    https://www.arubanetworks.com/techdocs/AOS-CX/10.10/PDF/diagnostics_83xx-10000.pdf

    Also for the source interface, look for the "ip source-interface" command set 

    https://www.arubanetworks.com/techdocs/AOS-CX/10.07/PDF/5200-7838.pdf



    ------------------------------
    If my post was useful, please Accept Solution and Give Kudos.
    ------------------------------
    Zak Chalupka
    Principal Engineer - HPE Aruba
    ACDX | ACMP | ACSP | ACCP
    wifizak@hpe.com
    ------------------------------
    Ideas expressed here are solely my own and not necessarily that of HPE Aruba.
    ------------------------------

    Original Message


  • 5.  RE: Syslog and Logging - Aruba 8325 to Syslog server

    Posted Feb 28, 2024 01:33 PM

    Thanks so much Zak. 


    Original Message