SD-WAN

 View Only
last person joined: 2 days ago 

Forum to discuss HPE Aruba EdgeConnect SD-WAN and SD-Branch solutions. This includes SD-WAN Orchestration WAN edge network functions - routing, security, zone-based firewall, segmentation and WAN optimization, micro-branch solutions, best practics, and third-party integrations. All things SD-WAN!
Back to discussions
Expand all | Collapse all

Tunnel between VPNC & branch gateway

This thread has been viewed 10 times

  • 1.  Tunnel between VPNC & branch gateway

    Posted 3 days ago

    Hi,

    For my test-lab I want to create a tunnel between the Virtual Gateway (VPNC) in a datacenter and a physical gateway in my home setup.

    I got experience in the Silverpeak/edgeconnect setup, so SD-wan at his own isn't new for me.

    I want to have more expierence in the SD-branch portofolio.

    But the VPNC concentrator is behind a router/modem of the ISP so NAT is being performed.
    I'm aware that's not ideal, but want to know if that is the issue.

    The Branch gateway at home has a public IP via PPPoE authentication, so no natting.

    What I see in the aruba central is that he discovered the public IP of both nodes.
    And want to setup the tunnel, but never comes up.

    I see both the correct uplinks on both devices in central.

    I enabled overlay mode Orchestrated & peering enabled but the correct hub selected.

    What I'm doing wrong and how can I troubleshoot this?



  • 2.  RE: Tunnel between VPNC & branch gateway

    Posted yesterday

    Just a reminder, that it's a complete SD-branch setup.
    With virtual gateway licenses  & all other licenses are ok.


    Original Message


  • 3.  RE: Tunnel between VPNC & branch gateway

    Posted 2 hours ago

    Make sure you are allowing UDP4500 through the ISP modem/router.  This should work just fine. 


    Original Message