Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

[TUTORIAL] Using Job Scheduler with CX Switches

This thread has been viewed 25 times

  • 1.  [TUTORIAL] Using Job Scheduler with CX Switches

    EMPLOYEE
    Posted Mar 08, 2024 07:12 PM

    This is a short technote on using job scheduler feature of CX switches.
    Job scheduler feature is pretty cool because you can run bunch of CLI commands at particular time as well as periodically. There are numerous use cases and here I'll cover three of them.
    •    rebooting APs periodically at specific time (in fact the approach here is about powering down POE ports irrespective of what is connected to them)
    •    the second one is for rebooting a switch.
    •    And finally schedule a reset for spanning tree statistic 

    Hope you'll find it useful and as always please send through your feedback for improvement.



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------