Hi,
because of the tagged vlan list, can you please tell us what kind of device is connected to 2/8 and 2/14?
Is every vlan affected or only the untagged 777?
Are both ports physically up? And the Spanning-tree state of the port?
Can you reach the device(s) connecting to from within the same vlan?
If a switch is connected, can you provide the neighboring port config, too? And the Spanning-tree state of the port?
Original Message:
Sent: Aug 30, 2022 09:09 PM
From: Habte Asmare
Subject: unable to ping some devices
I recently configured two ports and untagged them on existing vlan (xx). Yet I am not able to ping the attached devices on this newly added port 2/8 from a different vlans. I can however ping devices were the ports on the switch was configured previously on the same vlan (xx). forexample I can ping the attached device on port 2/14 literally from every vlans. But I can not ping the attached devices on the newly added port 2/8 from a different vlans. Both ports are configured similarly and untagged as well. Please refer to the screenshoots
This is the functional port (old configuration)