Wired

 View Only
last person joined: yesterday 

Back to discussions
Expand all | Collapse all

Updating a 2920 switch "Not enough space available in RAM"

This thread has been viewed 5 times

  • 1.  Updating a 2920 switch "Not enough space available in RAM"

    Posted Dec 15, 2023 10:37 AM

    I've got some 2920 switches I'm trying to update to the most current firmware WB_16_10_0024.swi

    I issue the copy tftp flash command to download it from my tftp server and receive back this message: "009M Not enough space available in RAM to complete the operation."

    I have three switches so far that have responded this way and several others that have downloaded and installed the update as expected.

    Anyone have tips on how to proceed?



  • 2.  RE: Updating a 2920 switch "Not enough space available in RAM"

    EMPLOYEE
    Posted Dec 18, 2023 09:21 AM

    Can you try to reboot the switch before the upgrade? A reboot may free up memory.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message