That is hard to tell without seeing the command output. Your firmware file may be corrupt, or the USB cannot be properly read; or it can be something different. Understanding the timing, like if the prompt returns immediately or after longer time may indicate if the file is actually transferred. Logs (show log -r) should provide more information.
Please reach out to Aruba TAC if you need urgent help.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Mar 27, 2024 08:00 PM
From: longlanh
Subject: upgrade switch 3810 firmware
copy usb flash filename.swi to secondary, it asking over write "Y" after it completes sh flash still the file. can someone advise?