https://www.arubanetworks.com/techdocs/AOS-CX/10.13/PDF/vsf.pdf
6300: VSF allows stacks to be formed using any combination of SKUs of the 6300 family. Up to 10 member switches will be allowed. Connections between the switches must use 10G, 25G, or 50G links. All VSF links in a stack should operate at the same speed.
The VSF stack, containing only the S0E91A and S0X44A SKUs, supports 10G, 25G, and 100G speed links. If a VSF stack includes a mix of S0E91A/S0X44A SKU and other SKUs, then it supports 10G and 25G VSF links only.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Jun 26, 2024 06:14 PM
From: inhamit
Subject: VSF link between 2 Aruba 6300M 48MRate JL659A switches
Hi, I want to know Can i use any switch port from number 1 to 48 to make VSF link between 2 Aruba 6300M 48MRate JL659A switches? I will use normal cat 6A cable between switches. no special cable.