Wired Intelligent Edge

 View Only
last person joined: 8 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

When i disconnect client from AP, client changes its band to 2.4 Ghz and connected again. Also now it is visible by its MAC address.

This thread has been viewed 4 times

  • 1.  When i disconnect client from AP, client changes its band to 2.4 Ghz and connected again. Also now it is visible by its MAC address.

    Posted 2 days ago

    When i disconnect client from AP, client changes its band to 2.4 Ghz and connected again. Also now it is visible by its MAC address.

    How can i find list of all disconnect client from AP.



  • 2.  RE: When i disconnect client from AP, client changes its band to 2.4 Ghz and connected again. Also now it is visible by its MAC address.

    EMPLOYEE
    Posted 2 days ago

    What AP/controller/firmware versions do you use?

    How do you see 'it is visible by its MAC address'?

    In general, you just see clients that are connected to an AP, not the ones that are not connected.

    Also, if you disconnect a client from the AP (as in instruct the AP to disconnect the client), it's expected that a client will reconnect unless that client has auto-connect disabled for the network.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message