Hello community,
Recently, I was at a customer's site for roaming problems with Zebra handheld scanners on a separate SSID. Despite having adequate signal coverage and overlap, the wireless connection was interrupted each time when walking through the organization and moving between AP's.
I tuned several settings like; signalstrength, power settings, channels etc, but I could nog get the roaming to become smoothly. Only when I was walking very slow then there were no disconnects!
Eventually I was able to solve the problem by changing the security of the SSID from WPA3 to WPA2. After that, roaming was no longer a problem and the disconnects were gone.
I know WPA3 is an improvement of WPA2 and is more secure, but has anyone seen similar problems?