中文讨论区

Reply
Moderator
Posts: 13
Registered: ‎05-01-2013

[Instant] 在Instant 4.0上实现基于角色或用户的上下行带宽控制

从Instant 4.0 开始,我们可以选择基于角色或基于用户对上下行流量配置带宽限制。

 

通过WEBUI的配置方法:

------------------------------------

1. 在WLAN设置中,针对某一无线网络配置带宽限制。

l1.jpg

 

2. 在角色设置中配置带宽限制

l2.jpg

 

通过CLI:

--------------

基于角色:

6c:f3:7f:cc:a5:08 (config) # wlan access-rule bandwidth-contract

6c:f3:7f:cc:a5:08 (Access Rule "bandwidth-contract") # bandwidth-limit upstream 3000

6c:f3:7f:cc:a5:08 (Access Rule "bandwidth-contract") # bandwidth-limit downstream 3000

 

基于用户:

6c:f3:7f:cc:a5:08 (config) # wlan access-rule bandwidth-contract

6c:f3:7f:cc:a5:08 (Access Rule "bandwidth-contract") # bandwidth-limit peruser upstream 3000

6c:f3:7f:cc:a5:08 (Access Rule "bandwidth-contract") # bandwidth-limit peruser downstream 3000

 

删除:

6c:f3:7f:cc:a5:08 (config) # wlan access-rule bandwidth-contract

6c:f3:7f:cc:a5:08 (Access Rule "bandwidth-contract") # no bandwidth-limit upstream 

6c:f3:7f:cc:a5:08 (Access Rule "bandwidth-contract") # no bandwidth-limit downstream

 

如果之前的版本下配置过基于用户的带宽,这个值将作为基于角色的下行带宽控制看待。

示例:
---------------

Wlan 6c:f3:7f:cc:a4:3c (config) # wlan ssid-profile qa-IAP-BWC-s3

6c:f3:7f:cc:a4:3c (SSID Profile “qa-IAP-BWC-s3 ") # per-user-bandwidth-limit 2000

6c:f3:7f:cc:a4:3c (SSID Profile “qa-IAP-BWC-s3 ") # end

 

6c:f3:7f:cc:a4:3c# show access-rule qa-IAP-BWC-s3

Access Rules

------------

Dest IP  Dest Mask  Dest Match  Protocol (id:sport:eport)  Action  Log  TOS  802.1P  Blacklist  Mirror  DisScan  ClassifyMedia

-------  ---------  ----------  -------------------------  ------  ---  ---  ------  ---------  ------  -------  -------------

any      any        match       any                        permit

Vlan Id           :0

ACL Captive Portal:disable

ACL ECP Profile   :default

CALEA             :disable

Bandwidth Limit   :downstream 2000 kbps (peruser) upstream disable(下行链路基于用户限制为2M,上行无限制)

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: