Aruba Instant & Cloud Wi-Fi

Reply
New Contributor
Posts: 4
Registered: ‎04-13-2014

AP-Rename

I have a number of Aruba IAP-105's deployed (approx 1200) and the firmware being used is 6.2.0.0-3.2.0.2_37229. All WAPS have virtual controllers except 2 of the 250 sites.

 

I have created scripts to query the virtual controller using snmpwalk and report the details of all the attached WAPS to a spreadsheet. I have also generated scripts that allows be to create the configration text and copies it to the clipboard. I then copy the text to the ssh session and this allows me to have a consistent configuration. 

 

I have managed to organise the data but now I need a way to rename the individual access points to their proper location based names. I want to edit the excel sheet data with proper names that is from mac-address to valid location based name and push the text  through the same script. 

 

I have looked-up commands like "ap-rename" but i dont thing it is relevant to this firmware.

 

Is someone aware of a command in this firmware or later firmwares that allows AP renameing on command-line.

 

Thanks

Moderator
Posts: 681
Registered: ‎04-16-2009

Re: AP-Rename

In v.4.0 the CLI syntax is  hostname <system-name>

New Contributor
Posts: 4
Registered: ‎04-13-2014

Re: AP-Rename

[ Edited ]

The hostname command only allows you to edit the WAP you are logged onto. I want to logon to virtual controller and rename all the attached AP's. I want to acheive this in a single ssh session. Will this command achieve this, if so could you please provide some assistance on the syntax 

 

Thanks

MVP
Posts: 113
Registered: ‎01-27-2016

Re: AP-Rename

Did you find a way to import a script renaming all the Instant AP's via CLI?

Search Airheads
Showing results for 
Search instead for 
Did you mean: