Aruba Instant & Cloud Wi-Fi

Reply
New Contributor
Posts: 4
Registered: ‎03-23-2016

Change Magic VLAN (Guest network) DHCP Settings

Hi,

 

After a bit of research, I understand that using the UI to create a Guest Network actually creates a VLAN numbered 3333 (called the 'magic VLAN'); addresses on this VLAN are NAT'd through the Virtual Controller's ip address to reach external networks.  Is this correct?

 

If so, how do I change the default DHCP pool settings for the magic VLAN?  I have not attempted to change the dhcp pool settings for vlan 3333 in the CLI, as I figured this would break whatever default NAT rules are established when the guest network is created.

 

Any help is appreciated!

MVP
Posts: 4,012
Registered: ‎07-20-2011

Re: Change Magic VLAN (Guest network) DHCP Settings

Under DHCP

2016-03-23 16_18_52-Settings.png

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
New Contributor
Posts: 4
Registered: ‎03-23-2016

Re: Change Magic VLAN (Guest network) DHCP Settings

Ah, thank you!

Search Airheads
Showing results for 
Search instead for 
Did you mean: