Aruba Instant & Cloud Wi-Fi

Reply
Regular Contributor I
Posts: 204
Registered: ‎09-28-2010

Client info on Instant APs

Finally getting around to testing my IAP units.   We wanted to test 802.11ac, and have deployed an AP-225.  

 

How can I see if the clients are connecting at AC, or some other rate?  I see the type is AN, but I guess they want to know if they are connecting at full AC so they can test the throughput and range.

Guru Elite
Posts: 8,191
Registered: ‎09-08-2010

Re: Client info on Instant APs

Show ap association from the CLI.

Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
Moderator
Posts: 681
Registered: ‎04-16-2009

Re: Client info on Instant APs

[ Edited ]

In the WebUI you can expand the Clients pane:

 

 

iap-ac.jpg

 

Same box but expanded so you can actually see what I was referring to...

 

iap-2.jpg

 

And here is the "show ap association" command Cappalli pointed out.   The client I circled above is the same client below and is a Galaxy S4.  The nice thing about "show ap association" is you can see the number of Spatial Streams of the client.

 

iap3.jpg

 

Expanded....

 

iap4.jpg

Search Airheads
Showing results for 
Search instead for 
Did you mean: