07-22-2013 12:45 PM
Sure! You login to the Instant UI:
1. Click on Maintenance in the top right
2. Click on the Convert Tab
3. Click on the selection to convert to a CAP (Campus AP)
4. Enter the IP address of the controller you wish to terminate to
That's it! If you'd like to convert BACK to an IAP, then simply issue a hardware reset (paperclip on the bottom of the unit).
Consulting Systems Engineer - ACCX, ACDX, ACMX
If you found my post helpful, please give kudos
05-07-2015 01:29 AM
I think this is related with image versions...
In order to convert an IAP to RAP, Controller should have minimum 6.1 Image version and also there is a minimum 4.1 IAP version