Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor I
Posts: 9
Registered: ‎08-12-2010

How I can configure one rule for destination Nat in IAP?

I need to send to external proxy all http traffic. In ARUBAOS for controller is simple, but not how the IAPs. Thanks

MVP
Posts: 1,408
Registered: ‎05-28-2008

Re: How I can configure one rule for destination Nat in IAP?

hi.

 

as far as i aware its not supported using InstantAP.

This is not possible on Aruba Instant and would probably have to be done on the upstream router (branch most likely).

 

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Occasional Contributor I
Posts: 9
Registered: ‎08-12-2010

Re: How I can configure one rule for destination Nat in IAP?

Aruba
Posts: 1,644
Registered: ‎04-13-2009

Re: How I can configure one rule for destination Nat in IAP?

[ Edited ]

Have you tried using the Destination-NAT action within the policy rules?  Is this what you are trying to do?

 

instant-dst-nat.jpg

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

New Contributor
Posts: 1
Registered: ‎03-08-2013

Re: How I can configure one rule for destination Nat in IAP?

I don't see destination NAT in the action tab, what software/license level are you on?

MVP
Posts: 371
Registered: ‎07-26-2011

Re: How I can configure one rule for destination Nat in IAP?

It is present in the latest release :)

ACMA, ACMP
If my post addresses your query, give kudos:)
Occasional Contributor II
Posts: 48
Registered: ‎10-16-2014

Re: How I can configure one rule for destination Nat in IAP?

Hi All,

 

Did this ever get resolved. I have a cusotmer trying to do the same thing; redirect HTTP traffic on an SSID to a proxy server on port 9090. We tried the config above but it does not work.

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: