07-01-2014 08:44 AM
I configured the first AP like virtual controller. I edit "Virtual controller IP" and I edited the AP menu to change "enabled" in prefered master. I created a SSID test.
Then I connected in the same switch the second acces point and what I should do for to see each other?
Thanks for all,
Solved! Go to Solution.
07-01-2014 09:20 AM
Also, make sure auto-join is enabled.
Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
07-01-2014 02:39 PM
If the second iAP comes up on the same VLAN as the first, it will see that there is another iAP already up and in-charge.
It will then check software version and pull a copy of the software from the first iAP (as long as it's a compatible model) and self up/down-grade prior to joining the cluster.
Are you not seeing new iAP join the cluster auto-magically?
if I've helped, please give kudos
if I've provided a solution, please mark the solution so others can find it