08-27-2015 10:08 PM
IAP-205H was powered via PoE switch. I access it via instant wifi ssid unfortunately can't connet via GUI (172.31.98.1 or instant.arubanetworks.com) and error displayed "webpage is not available".
Solved! Go to Solution.
08-27-2015 10:47 PM
Reset it to factory default and try. BTW, are you joining this new IAP to an existing cluster ? if so, map this new IAP to a new VLAN ( other than existing cluster VLAN ), it should work.
Usually you should be able to take GUI with Instant SSID.
Please feel free for any further help on this.
[Is my post helped you ? Give Kudos :) ]
08-30-2015 01:27 PM
I tried to set it in factorty default unfortunately can't access it.
My set up is only stand alone AP connected to PoE switch and the objective is to access the AP via GUI only.
08-30-2015 01:54 PM
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs
08-30-2015 02:13 PM
No. I just used Default IP address 172.31.98.1 for web access.
Network Set UP:
PoE Switch < ----- > IAP 205-H < ----- > Laptop
1.Laptop connect to instant SSID.
2.Web access via 172.31.98.1 or it will be redirected to https://instant.arubanetworks.com:4343.
3.Webpage is not available
By the way I tried to two AP's in this same network set up and I successfully accessed the AP (IAP-205 & IAP-215) via GUI. Only in IAP-205H encountered this error and GUI access is not successful.
09-13-2015 08:00 PM