Aruba Instant & Cloud Wi-Fi

Reply
New Contributor
Posts: 3
Registered: ‎03-22-2015

How to check configuration status for IAPs?

Hello all,

 

On several occasions I've encountered difficulties where I'll apply a configuration change but it doesn't take effect.  Rebooting the IAPs may resolve the issue and cause the configuration to be applied.  Or the reboot may cause the IAPs to revert to a previous configuration.  It's difficult to troubleshoot an issue when you're not sure of what the IAP is actually using for a configuration.

 

Is there a command to determine the synchronization status of the configuration across all IAPs?  I'm running 6.4.2.3 (since the IAP-103s aren't support for GA - Current).

 

Thanks.

MVP
Posts: 4,164
Registered: ‎07-20-2011

Re: How to check configuration status for IAPs?

With this command you can see the changes have not been applied (committed):

IAP-1# show uncommitted-config

 

And with this one you can see everything has been saved (committed) :

IAP-1# show configuration 

 

You can also take a look at the config ID :

IAP-1# show aps

 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 301
Registered: ‎04-03-2014

Re: How to check configuration status for IAPs?

Are you using Airwave or Aruba Central for management or are you using the local management on Instant?

Christoffer Jacobsson | Aranya AB
Aruba: ACMX #537 ACCP | CWNP: CWNA CWDP CWSP
Search Airheads
Showing results for 
Search instead for 
Did you mean: