04-02-2014 02:08 PM
We brought 2 aruba 105 access point. We have an wireless network here with aruba 105 ap. I need to add this new ap to my network. So I connect the new 105 ap to the switch port to get information from the currently installed ap's. But the new ap's power led and enet led are blinking continously not showing the sign of stable. I would be very thankfull if you give a solution to this problem
Solved! Go to Solution.
04-02-2014 02:13 PM
Are you seeing red or green LED ? for Ethernet or 11g or 11a ?
Can you console into the AP?
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
04-03-2014 07:25 AM
If you are connected to an PoE injector that supports 10/100 Mbps, you will see an amber LED. Even if your switch is 10/100/1000 Mbps, your PoE injector and IAP will auto-negotiate 100 Mbps. If you do not already have the PowerDsine 3501G I recommend that you try instead.