11-11-2014 07:40 PM
I was installing an AIP115 but after configured everything I found that Radios never show power o channel or any data for any band
Solved! Go to Solution.
11-11-2014 08:31 PM
What version is running on your IAP-115? Is this a -US or "Rest of World" model? If ROW what country code are you setting? Can you also tell us the color each of the LEDs? Are there other IAPs running?
11-11-2014 08:37 PM
On the back of the IAP you will find a model sticker. If it says "IAP-115-US" it is a US model or "IAP-115-RW" is Rest of World. Also, only the Rest of World version will ask you for a country code.
Depending on the version of SW on the IAP you may be trying to set a CC that is not supported by that release. Let us know what version.
11-11-2014 08:41 PM
Ahh ok. I'm connected remote, but it asked Country Code so I can asume it is ROW.
This is the Version version 184.108.40.206-4.0.0
I tryied to upgraded from maintenance window, but the "Check for new version" timed out!
11-11-2014 08:48 PM
Not sure what version you are running as you are missing the last digit. Log in and use the CLI command " show version" or in the GUI go under "Maintenance".
You can also log into the TAC site (requires a support contract) and download the latest release (220.127.116.11-18.104.22.168).
11-19-2014 05:07 AM
I set it using this command: virtual-controller-country CO
SV is not currently supported on this AP.