01-14-2015 07:08 AM
Customer has a network of IAP-205s with 802.1x radius auth setup on a server 2003 domain controller. initially this was setup, tested and domain machines/users could connect fine. Recently when the customer started to connect new users he is getting a popup (see attachment) and unable to successfully authenticate. There is a certificate installed on the Radius server per its setup. As far as settings on the ssid, it is network assigned for IP addresses, wpa2-enterprise with Termination enabled. Thoughts on why this would occur?
01-14-2015 07:10 AM
The popup is a normal part of the EAP process.The only way to elminate this is to manually configure the device or use a configuration utility like QuickConnect or GPO.
Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
01-14-2015 07:11 AM
If there is a certificate on the radius server, termination should be disabled...
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs
01-14-2015 07:12 AM - edited 01-14-2015 07:12 AM
Weird, i tried to recreate pretty much the same scenario in my lab using an IAP 135 but do not get this popup.