Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor II
Posts: 17
Registered: ‎05-17-2012

IAP Wireless Site Survey

[ Edited ]

Is it possible to confgure a standalone IAP-135 for a site survey using a battery POE pack without a uplink?  Is the only option to cart around a midspan power injector with a laptop or small switch?  What are the recommended steps to configure the IAP-135?


Thanks

 

Aruba
Posts: 1,635
Registered: ‎04-13-2009

Re: IAP Wireless Site Survey

[ Edited ]

You can try setting the "Can be used without uplink" setting under the SSID (3.3 and higher).

 

You may need to convert the IAP to a Standalone AP to make this work.    Maintenance --> Convert --> Standalone AP.   If you do this, you may also need to set the uplink to Ethernet under Settings --> Uplink --> Uplink Preference.     Set the network up before converting it.

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

MVP
Posts: 2,866
Registered: ‎10-25-2011

Re: IAP Wireless Site Survey

yes you can have a iap to use it as site survey...

A while ago i did a manual on how to do this

 

http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/Site-Survey-with-IAP-Manual/td-p/57274

 

Cheers

Carlos

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Search Airheads
Showing results for 
Search instead for 
Did you mean: