10-08-2015 08:51 PM
In my lab i have an IAP-225 which is running 184.108.40.206 EA code. While doing some scans i noticed that it is broadcasting a hidden SSID. I have not configured this.
The AP is managed by Airwave, and configured through the IGC.
Here is what i see over the air while scanning with airodump-ng
AC:A3:1E:AA:01:31 -48 45 3956 0 0 52 54e WPA2 CCMP PSK <length: 0>
AC:A3:1E:AA:01:32 -48 56 3938 955 2 52 54e WPA2 CCMP PSK HelloWorld
When i look at the radio in AMP i see that it does not show a hidden network
I have only two SSIDs configured in the IGC which is my HellowWorld SSID and another Guest on 2.4 ghz only. Show run on the AP show only 2 wlan ssid-profiles
Why is my access point sending out beacons for a hidden network? Has anyone else seen this behaviour?
ACDX, ACCP, CISSP, CWNA
Solved! Go to Solution.
10-09-2015 12:33 AM
Could that be the mesh ssid you're seeing?
If my post is helpful please give kudos, or mark as solved if it answers your post.
ACCP, ACMP, ACMX #294
10-09-2015 08:19 AM
Please try enabling the option 'Extended SSID' under System, Advanced options.
This option controls the automatic mesh option, that should only broadcast on 5GHz, to build a wirless mesh if AP's are not connected to the wired network. If IAPs have been in the same cluster, you can disconnect one AP from the network and just power it to build up a mesh link to the connected AP's.
If mesh is not used, turning on 'Extended SSID' allows to use the mesh SSID for another SSID.
If you have urgent issues, please contact your Aruba partner or Aruba TAC.