Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor I
Posts: 8
Registered: ‎03-16-2016

IAP205 - How to configure IP reservation to wireless client?

Hi,

 

I have an IAP205 which is connected to a ADSL NTU (very simple setup)...I use the IAP to dish out IP address to all the wireless client.

 

How do I configure IP reservation in the IAP so that some of the wireless client will get the same IP whenever they get connected to the IAP?

 

I check the "DHCP server" menu but can't find any configuration (only those DHCP scoping)....Is IP reservation hidden somewhere?

 

Thanks

Guru Elite
Posts: 21,010
Registered: ‎03-29-2007

Re: IAP205 - How to configure IP reservation to wireless client?

The internal DHCP server does not support reservations in IAP.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I
Posts: 8
Registered: ‎03-16-2016

Re: IAP205 - How to configure IP reservation to wireless client?

Thanks...

How about can I exclude certain range of IP in the IAP so that it would
assign that range? Ie. We will key in the static IP in those laptops...
Guru Elite
Posts: 21,010
Registered: ‎03-29-2007

Re: IAP205 - How to configure IP reservation to wireless client?

You can configure a network range for clients ;  http://www.arubanetworks.com/techdocs/Instant_41_WebHelp/InstantWebHelp.htm#UG_files/DHCP_conf/DHCP Config.htm?Highlight=dhcp



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I
Posts: 8
Registered: ‎03-16-2016

Re: IAP205 - How to configure IP reservation to wireless client?

I took a look at the URL but it doesn't solve my problem....The fields only
allow me to put in the subnet and mask. It didn't have any exclude field..

For example, I have 3 wireless printers with the static IP(10.1.1.201,
10.1.1.202, 10.1.1.203) configure in them. How do I ensure the IAP does not
dish out these 3 IPs when a wireless client connected to it?

In Cisco, they have this "ip dhcp exclude xxx" command to exclude IP from
the DHCP server...How do I do that in IAP?
Guru Elite
Posts: 21,010
Registered: ‎03-29-2007

Re: IAP205 - How to configure IP reservation to wireless client?

You are right.  You cannot exclude anything with the virtual AP assigned DHCP server.  It is really intended for just guest networks...



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: