Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor II
Posts: 12
Registered: ‎04-18-2013

IAP3 with Huawei E160 dongle

Hi Guys,

 

I'm trying to get an IAP3 working with a E160 dongle in the UK on O2 but seem to be having a problem with it.

Is there a specified firmware version that I need to use on the dongle.

I have tried entering the info from the below but when i plug in the dongle the aruba just keeps rebooting.

The Aruba is using FW 6.2.1

 

Thanks

Si

 http://community.arubanetworks.com/aruba/attachments/aruba/unified-wired-wireless-access/16874/1/RFE1381-Configuring%20Cellular%20Modems%20for%20Aruba%20Remote%20APs%20(3).pdf

usb_user=O2web usb_passwd=password usb_type=option (2)

usb_dev=0x12d11003

usb_dial=ATDT*99***1# usb_init=AT+CGDCONT=1,'IP','mobile.o2.co.uk'

 

Frequent Contributor I
Posts: 97
Registered: ‎04-13-2009

Re: IAP3 with Huawei E160 dongle

Hi, 

Please try to connect your modem to PC or (best option) to Linux. Then check USB Device ID. Sometimes modem vendors change ID parameters. I had the same with E173. 

Regards, 

Marek Krauze, CWNE# 174, ACMX #295, ACDX #356
Something cool, helpful or interesting in my post - click the Kudos Star.
Helped to solve your problem - Click Accept as Solution
Occasional Contributor II
Posts: 12
Registered: ‎04-18-2013

Re: IAP3 with Huawei E160 dongle

when i check the diagnostics for the modem it says its deffinitely an E160 Revision 11.609.10.02.432

Regular Contributor I
Posts: 190
Registered: ‎04-27-2009

Re: IAP3 with Huawei E160 dongle

Hi marqs,

 

you have your e173 settings by hand , have also some o2 branded one now with huawei firmware , still in hybrid mode. im digging into another 3G modem parameters document too , see attached - this is suitable to the other one you posted.

 

https://dl.dropboxusercontent.com/u/67416983/3g_modem_parameters-1.pdf

 

thanks

ben

Search Airheads
Showing results for 
Search instead for 
Did you mean: