06-07-2013 02:41 AM
I've noticed that 5GHz SSID comes up 10 minutes after AP is up due to DFS. This is pretty painfull with Survey AP which is turn on/off very often.
Is there a woraround for this?
06-07-2013 06:38 AM
You probably done this , but have you tried turning DFS off ?
And how were you able to determine that it was getting turned off because of DFS ?
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
06-07-2013 06:54 AM
Set the channel to one of the non-dfs channels. Unfortunately you need to do this every time it powers on, which may not be practical, so try to have a battery pack you can carry around with the AP. Bear in mind, I found that this only lasts for about two hours and then you have to do it again.
Alternatively when you provision the RAP, put it into a group where the channel is fixed and ARM/scanning is disabled.
Hope that helps.
If my post is helpful please give kudos, or mark as solved if it answers your post.
ACCP, ACMP, ACMX #294