01-31-2013 09:04 AM
I'm trying to implement L3-mobility between two Instant networks.
My test network is formed by a layer-3 switch to which are connected, on two different VLANs (VLAN1 and VLAN2), two IAP-105.
I have so two Virtual Controllers with the same SSID "Test-Mobility", configured in the same way:
Client IP assignment: Virtual controller assignment
Key management: WPA2-PSK
MAC Authentication: Disabled
Access: Network Based: Assign VLAN1 (2)
With my laptop, I initially join the IAP2 and I obtain the IP address 192.168.2.204; I start a session ping to the VC1 and VC2, wich respond correctly.
Then I move from the area covered by IAP2 to the one covered by IAP1, always with the active ping sessions: here is the problem! My laptop starts to lose ping packets to both VCs, but my laptop doesn't say me that the WiFi connection is lost!
After a long while, I come back to IAP2 area, and ping continue to be lost!
To have success pings, i have to disconnect and reconnect to the SSID.
I therefore conclude that the roaming doesn't happen!
PS: To configure the L3-mobility I followed Chapter 8 of the pdf "Instant Access Point User Guide 220.127.116.11-18.104.22.168"
Does anyone have any idea or suggestion?
Telecommunications engineer - ACMP2013