Aruba Instant & Cloud Wi-Fi

Reply
Contributor II
Posts: 58
Registered: ‎01-26-2014

Lesson Learned: Firmware mismatch on multiple IAPs

I just received two IAPs (a 205 and a 215) and hooked them into a S1500-12P switch.

 

Super annoying: I setup the IAP-215 as the primary VC, but the IAP-205 just would not show up, and would just reboot constantly.

 

The IAP-215 had 6.4.2.0-4.1.1.0_45444 preloaded

The ISP-205 had 6.4.2.0-4.1.1.0_46028 preloaded

 

I upgraded both to 6.4.2.3-4.1.1.3_48994 and now both are visible from the GUI. Hooray.

 

But c'mon, when I click on "Check For New Version" it says there are none. What gives?

 

Anywho, hope this helps someone in the future.

MVP
Posts: 1,405
Registered: ‎10-25-2011

Re: Lesson Learned: Firmware mismatch on multiple IAPs

Those are the same version, the 205 should have discovered the 215 VC.

The "check for new version" checks the cloud and sometimes takes a few weeks before a new release is available in the cloud.
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Search Airheads
Showing results for 
Search instead for 
Did you mean: