Aruba Instant & Cloud Wi-Fi

Reply
New Contributor
Posts: 4
Registered: ‎04-13-2014

SNMP Query and MIBs

I am using Aruba Instant IAP-105's. We have more then a 1000 of these models deployed in the environment. I have been using ArubaOS Version 6.2.0.0-3.2.0.2 firmware at most locations. The exisiting configuration has 2 SSIDs where one has WPA2 phassphrase and the other has RADIUS with Dynamic radius configured. I have scripts that use 'snmpwalk' to query the virtual controllers at multiple sites for details of attached AP's. I recently tested a newer firmware 6.3.1.1-4.0.0.0_40930 and noticted that the VC does not respond to any queries. The master controller does respond to the snmp query but the master controllers are dynamic.

My script usees VC ip which is set to static on every subnet. 

 

Is there any way of enabling this.

 

Thanks

MVP
Posts: 1,405
Registered: ‎10-25-2011

Re: SNMP Query and MIBs

Walking the VC will be fixed in an upcoming release 4.1. Please visit http://community.arubanetworks.com/t5/Aruba-Instant-Cloud-Wi-Fi/SNMPWALKing-the-VC-does-not-always-respond/m-p/91112/highlight/true#M2512

for more information.

The issue is that if you SNMPWALK the VC IP, whoever is acting as VC will reply, not the VC IP.
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
New Contributor
Posts: 4
Registered: ‎04-13-2014

Re: SNMP Query and MIBs

Thanks. 

 

Do you have any infor on the ETA.

 

Thanks

MVP
Posts: 1,405
Registered: ‎10-25-2011

Re: SNMP Query and MIBs

Sometime in May

Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Search Airheads
Showing results for 
Search instead for 
Did you mean: