10-24-2016 02:25 PM
Hi All.. ok. so im told in order to join my new IAP335's (firmware 6.5) to my existing group of IAP 105's, 135's, and 225's i need to run instant 6.4.3 or newer on my non 335's . when i do a check for new firmware its telling me that there are no new firmware availalble and im on 188.8.131.52-184.108.40.206_54915. where can i go or whats the URL i can use to have it search for 6.4.3 for the other IAP's. any help is greatly appreciated.
Solved! Go to Solution.
10-24-2016 02:32 PM
Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
10-24-2016 04:45 PM - edited 10-25-2016 01:28 AM
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs
11-01-2016 04:34 AM
Ok so.. i do have a resolution of sorts if you want to call it that. in order to have the IAP 335 connect to the current group.. you have to get all of the IAP's to ver -220.127.116.11 firmware, however this version only supports IAP 225 and newer. so, i either have to replace my 105's and 135's or not use the 335.. and unfortunately.. ill have to not use the 335.. ill eventually replace the older devices but just not right now. so if your in my situation where you have a mix of IAP's stick with 225's for now.