Deploy a MM VMC to ESXi
Q:

How do I deploy a Mobility Master controller to ESXi?

ASE Link:  Go to the solution



A:

Summary

This solution shows how to deploy and initially configure a Mobility Master 8.0 configuration step by step.  It will demonstrate how to deploy one MM (Mobility Master) as a VMware virtual machine, configure its networking, and license the product.

Software Version(s) Required

AOS 8.0

VMware ESXi 5.5 - 6.0

Configuration Notes

This solution does a walkthrough a network controller within a VM so it has several layers of abstraction.  Pay attention to what network interfaces are referred to and how they are mapped.

Also be aware if improperly configured, the setup can cause a network loop that may shutdown network connectivity within the ESX server.

Platform(s) Tested

ArubaMM (VMware OVA), Version 8.0.0.0

Licenses

None

References

Version History
Revision #:
2 of 2
Last update:
‎12-08-2016 02:31 PM
Updated by:
 
Labels (1)
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.