Campus Switching and Routing

New Contributor

Aruba 2930M SNMP Traps (Stack and PSU)

Our Aruba 2930M are not generating an SNMP trap when a Commander of the stack fails. And even the other SNMP trap for (Standby and Members) are differents OIDs. Is very hard to know or get track of which member is down, and when the switch come back (because it can come back as a different stacking type (Commander, Standby or Member).


We also are not getting a very good trap when one of the PSU fail.

All that I get to receive is a trap as a "EVENT" message, says a sentence about the PSU fault or PSU is OK. I'm wondering if this is the only trap that we can configure to receive. 

I would like a better more detailed trap, without the "event message" logging style.


New Contributor

Re: Aruba 2930M SNMP Traps (Stack and PSU)

Any help?

Search Airheads
Showing results for 
Search instead for 
Did you mean: