Campus Switching and Routing

Reply
Frequent Contributor II

Aruba Switches RIP Protocol

Aruba switches supports OSPF

does it support RIP ?

 

Guru Elite

Re: Aruba Switches RIP Protocol

Static routes, OSPF and PIM


Tim Cappalli | Aruba Security
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Frequent Contributor II

Re: Aruba Switches RIP Protocol

Strange to support OSPF without supporting RIP 

Guru Elite

Re: Aruba Switches RIP Protocol

.
******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Aruba

Re: Aruba Switches RIP Protocol

Telnet-1,

When developing our L3 feature set, a majority of our customers requested OSPF as opposed to RIP for their campus deployments. The two protocols share little to nothing in common so adding RIP would be a separate development effort. If you would like to see RIP, I would recommend submitting the request to our idea portal.

 

https://arubanetworkskb.secure.force.com/cp/ideas/ideaList.apexp

 

Best regards,

 

Madani

Occasional Contributor I

Re: Aruba Switches RIP Protocol

Hi,

 

This is so very late since the question was posted, however, this may help others who might have the same question.

 

YES, aruba switches do support RIP. e.g. 2620, 2920, 3800 series and more.

Contributor II

Re: Aruba Switches RIP Protocol

Hi Ahsan,

Yes the current ArubaOS-SW switches like the ones you mentioned support RIP.
But this post was from 2013, back then Aruba and HPE were not one company. So the post was about the legacy Aruba switches and as Madani stated those didn’t support RIP.

Hope this helps
Cheers, Frank
Aruba Partner Ambassador| AMFX#22| ACCX#613| ACMX#733| ACDX#744
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: