Campus Switching and Routing

Reply
Highlighted
New Contributor

Create local user sw 2930F

I need to create several local users in a sw 2930F, by default the swicth only allows me the manager and the operator. How can I create multiple users?

Moderator

Re: Create local user sw 2930F

--Moving this thread to the appropriate forum--

 

You can use "role based access control", which let's you create up to 64 different admin roles. Check chapter 15 of the "Access Security guide" (attached).

Samuel Pérez
ACMP, ACCP, ACDX#100

---

If I answerd your question, please click on "Accept as Solution".
If you find this post useful, give me kudos for it ;)
New Contributor

Re: Create local user sw 2930F

Good afternoon,

Thank you very much for your answer, it is true that for this to work it is necessary to have clearpass?

 

I hope to receive your comments.

 

Greetings and blessings.

Aruba Employee

Re: Create local user sw 2930F

Greetings!

 

ClearPass is not required to create a local user on the switch.  You can use a command similar to the following to create a local switch user assigned a predefined role (roles are listed in the user guide linked above):

 

ArubaSwitch(config)# aaa authentication local-user localadmin group Level-15 password plaintext 
New password for localadmin: ********
Please retype new password for localadmin: ********

 



Matthew Fern | Technical Marketing Engineer, Wired Intelligent Edge
Aruba, a Hewlett Packard Enterprise Company
New Contributor

Re: Create local user sw 2930F

Thank you very much, today I did the tests on the switch and if it worked.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: