Controller Based WLANs

Debugging to be enabled for voice issues

Logging commands:

logging level debugging user
logging level debugging user process stm
logging level debugging user process stm subcat all


Show voice client-status
Show voice call-cdrs


 
 show log user all | include rtpa
Jun 11 15:53:58 :501065:  <DBUG> |stmsend_rtp_session_info_to_ap: #rtpa# sending session info to ap-stm formac(00:01:3e:10:04:6b)
Jun 11 15:53:58 :501065:  <DBUG> |AP Talisker-1@10.15.16.201 stmpapi_handler: #rtpa# RTP_SESSION_INFO message from switch-stm received by ap-stm
Jun 11 15:53:58 :501065:  <DBUG> |AP Talisker-1@10.15.16.201 stmhandle_rtp_info_from_switch: #rtpa# RTP_SESSION_INFOmsg dev(wifi1), mac(00:01:3e:10:04:6b) sport(17184) dport(17172)
Jun 11 15:53:58 :501065:  <DBUG> |stmsend_rtp_session_info_to_ap: #rtpa# sending session info to ap-stm formac(00:01:3e:10:2b:61)
Jun 11 15:53:58 :501065:  <DBUG> |AP Talisker-1@10.15.16.201 stmpapi_handler: #rtpa# RTP_SESSION_INFO message from switch-stm received by ap-stm
Jun 11 15:53:58 :501065:  <DBUG> |AP Talisker-1@10.15.16.201 stmhandle_rtp_info_from_switch: #rtpa# RTP_SESSION_INFOmsg dev(wifi1), mac(00:01:3e:10:2b:61) sport(17172) dport(17184)

 

System debugs will details of the call quality reports send by AP to the switch stm.

 

(Arun6000) #show log system all | include rtpa
Jun 11 15:55:28 :339306:  <DBUG> |rtpartpa_handle_rtp_stats_report, rtpa_handle_rtp_stats_report: received rtp stats from ap-stmfor node(00:01:3e:10:04:6b)
Jun 11 15:55:28 :339306:  <DBUG> |rtpartpa_handle_rtp_stats_report, rtpa_handle_rtp_stats_report: b(0x100302b8) up_j(237)up_pl(59203) up_d(59303) dn_d(2326) dn_j(2293) dn_pl(7)
Jun 11 15:55:28 :339306:  <DBUG> |rtpartpa_handle_rtp_stats_report, rtpa_handle_rtp_stats_report: received rtp stats from ap-stmfor node(00:01:3e:10:2b:61)
Jun 11 15:55:28 :339306:  <DBUG> |rtpartpa_handle_rtp_stats_report, rtpa_handle_rtp_stats_report: b(0x10031188) up_j(240)up_pl(56121) up_d(56221) dn_d(2009) dn_j(2026) dn_pl(33)
Jun 11 15:55:28 :304003:  <DBUG> |stm|  handle_rtpa_result: #rtpa# sip(10.15.17.212) upl(0) uj(32) ud(240) dpl(33) dj(50)dd(2009)
Jun 11 15:55:28 :304003:  <DBUG> |stm|  handle_rtpa_result: #rtpa# sip(10.15.17.213) upl(0) uj(47) ud(237) dpl(7) dj(57)dd(2326)

Version History
Revision #:
1 of 1
Last update:
‎10-29-2014 10:40 AM
Updated by:
 
Labels (1)
Contributors
Comments

Hi,

 

After setting the following:

To set the voice logging level to debugging:

(host) #configure terminal

(config) #logging level debugging user subcat voice

To debug voice logs for a specific client:

(config) #voice logging

(VoIP Logging) #client-mac 11:22:33:44:55:67

To view the client's MAC address for logging:

(host) #show voice logging

 

What is the command to show the voice debug logs? ___

Is it show log all?___

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.