Log in to ask questions, share your expertise, or stay connected to content. Don’t have a login? Join now.
Product and Software: This article applies to all Aruba Mobility Controllers and ArubaOS 3.3.2.12. To enable debug to log the IGMP messages, follow these steps:
1) Login to the Aruba Mobility Controller using the SSH connection. 2) Issue the following commands: config t logging level debugging network process pim end To view the debug output, issue the following command: show log network <number of lines> To disable logging the messages, issue the following commands: config t no logging level debugging network process pim end
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.