Controller Based WLANs

How do I find out whether a bandwidth contract is being applied to a specific user or not?

Aruba Employee

Question:  How do I find out whether a bandwidth contract is being applied to a specific user or not?

 

 

Product and Software: This article applies to all Aruba controllers and ArubaOS 3.x and later.

 

To find out whether a bandwidth contract is being applied to a specific user, issue this command:
(Aruba800) #show user ip 10.100.119.92
Name: localuser, IP: 10.100.119.92, MAC: 00:30:65:28:3f:a7,
Role: authenticated, ACL:17, Age: 00:00:01
Authentication: Yes, status: successful, method: 802.1x, protocol: EAP-TTLS, server: TEST
Bandwidth contract = 20m (20000000 bits/sec)
Role Derivation: default for authentication type 802.1x
Idle timeouts: 0, ICMP requests sent: 0, replies received: 0
Mobility state - Home Agent: Yes, Proxy ARP: No, Tunnel ID: 0
Flags: internal=0, trusted_ap=0, delete=0, roaming=0
Flags: innerip=0, outerip=0, guest=0, station=0, download=1
Auth fails: 0, phy_type: 2, reauth: 0, Bwm Contract: 1
Vlan default: 1, Assigned: 0, Current: 0
Mobility Messages: L2=0, Move=0, Inter=0, Intra=0, ProxyArp=0, Flags=0x0
Tunnel=0, SlotPort=0x1021, Port=4169
Role assigned: n/a, VPN: n/a, Dot1x: n/a

 

You can also issue these commands:
#show user-table verbose
Users
-----
IP             MAC               Name   Role Age(d:h:m)  Auth  VPN link AP name        Roaming Essid/Bssid/Phy    Profile    Forward mode Type   Server         Vlan   Bwm
----------    ------------       ------ ---- ----------  ----  -------- -------        ------- ---------------    -------    ------------ ----   ------         ----     ---
10.139.218.151 d4:20:6d:1d:65:3f sbu-Guest    00:00:06              Adm-Phy-R129-J3103D         Wireless WolfieNet-Guest/00:1a:1e:24:d5:01/g-HT WolfieNet-Guest tunnel Android 352 (352) Up: 134 Down: 135

 

#show datapath bwm table
Datapath Bandwidth Management Table Entries
-------------------------------------------
Contract Types :
   0 - CP Dos 1 - Configured contracts 2 - Internal contracts
-----------------------------------------------
Flags: Q - No drop, P - No shape(Only Policed),
       T - Auto tuned
--- -------- --------- ---------- ----------- -----------------
     Cont                      Avail   Queued/Pkts
Type Id   Bits/sec   Policed   Bytes   Bytes        Flags
---- ---- --------- ---------- ------- ------------ -----
0    1    20000000          0   78125   0/0
0    2    4000000           0   15625   0/0
0    3    160000000         0  603172   0/0
0    4    4000000           0   15625   0/0
0    5    2000128           0    7813   0/0
0    6    2000128           0    7813   0/0
0    7    2000128           0    7813   0/0
1    1    360192            0    1407   0/0
1    2    512000            0    2000   0/0
1    3    1537024           0    6004   0/0
1    4    2048000           0    8000   0/0
1    5    512000            0    2000   0/0
1    6    360192            0    1407   0/0
1    7    1537024           0    6004   0/0
1    8    360192            0    1407   0/0
1    9    1537024           0    6004   0/0
1   10    360192            0    1407   0/0
1   11    1537024           0    6004   0/0
1   12    360192            0    1407   0/0
1   13    1537024           0    6004   0/0
1   14    360192            0    1407   0/0

 

Version history
Revision #:
2 of 2
Last update:
‎07-05-2014 12:47 AM
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.