Product and Software: This article applies to all Aruba mobility controllers with all code versions.
To set the banner on the Aruba controller, use the following commands through the CLI:
(Aruba) #configure terminal
Enter Configuration commands, one per line. End with CNTL/Z
(Aruba) (config) #banner motd #
Enter TEXT message. End with the character '#'.
This is Deepak's controller
#
(Aruba) (config) #
(Aruba) (config) #show banner
This is Deepak's controller
If you logout from the controller and try to login again you will see this banner:
login as: admin
admin@10.130.226.190's password:
This is Deepak's controller
(Aruba) >en