How to identify which port is Gig and which is 10Gig on 7xxx series controller?

Aruba Employee

QuestionHow to identify which port is Gig and which is 10Gig on 7xxx series controller?

 

On the 7xxx controllers ports you have 6 ports in which 0 and 1 are marked as GIG dual media (fiber or Ethernet) port not intended for 10GIG. However the ports which are marked as 0/0/2,0/0/3,0/0/4,0/0/5 are capable of 10GbE (10GBase-X (SFP+) Ports which are dual speed can operate GIG or 10GIG.

Below is the command output of "show port status" but looking at this output we can't identify which is GIG or 10 GIG ports.

 

rtaImage.png

 

To Identify from CLI below is the command which shows whether it's GIG or 10GIG port.

 

rtaImage2.png

 

rtaImage3.png

 

To Identify from WebUI below is the screen-shot which shows whether it's GIG or 10GIG port.

Monitoring > Ports > Select the port and click profile

 

rtaImage4.png

 

rtaImage5.png

Version history
Revision #:
1 of 1
Last update:
‎07-11-2014 03:31 PM
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.