Question: What are the default configurations on the MMS appliance?
Product and Software: This article applies to all MMS software and hardware.
Default Administrative Settings (factory default settings)
User name: admin
Password: admin
Static IP address: 172.16.0.254
Netmask: 255.255.255.0 (/24)
Default gateway: none specified
Hostname: mms100
NOTE: You can change the default network address and gateway using the local control panel. Or you can use a cross-over Ethernet cable to connect a client directly to Ethernet port 1, log into the Mobility Management System, and reconfigure the appliance before you connect the appliance to the network.
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.