What is file syncing and how to enable it?

Aruba Controller running 6.4 and above with active access points.

  • In a master/local/standby deployment, the file syncing can be enabled to ensure that the regulatory-cert which has the AP regulatory information that is stored on the master is shared with its subordinate controllers.
  • File syncing is enabled by default, with a default sync time of 30 minutes.
  • The sync time can be set between 30 to 180 minutes.

We can execute below commands to configure file syncing for AP regulatory-cert file across subordinate controllers.
(Aruba7210) #configure terminal
Enter Configuration commands, one per line. End with CNTL/Z

(Aruba7210) (config) #file syncing profile
(Aruba7210) (File syncing profile) #file-syncing-enable
(Aruba7210) (File syncing profile) #sync-time 30
(Aruba7210) (File syncing profile) #!
(Aruba7210) (config) #exit
(Aruba7210) #

We can verify if the file syncing has been enabled or not with below commands and also the Regulatory-cert file version on all the controllers has been in sync or not.
(Aruba7210) #
(Aruba7210) #show file syncing profile

File syncing profile
Parameter        Value
---------        -----
File syncing     Enabled
Sync time (min)  30

(Aruba7210) #
(Aruba7210) #
(Aruba7210) #show switches regulatory

All Switches
IP Address     Name       Location          Type    Model      File Version  File Build
----------     ----       --------          ----    -----      ------------  ----------   Aruba7210  Building1.floor1  master  Aruba7210  1.0_53255     Jan 8,2016  Aruba3400  Building1.floor1  local   Aruba3400  1.0_53255     Jan 8,2016

(Aruba7210) #
(Aruba7210) #
Version history
Revision #:
2 of 2
Last update:
‎03-29-2017 12:57 PM
Updated by:
Labels (1)
Search Airheads
Showing results for 
Search instead for 
Did you mean: