What is the command to check controller's system information?

MVP
MVP
Q:
What is the command to check controller's system information?


A:
We can check the controller's system information with help of below command.
 
Below output is from an Virtual Mobility Master:
(ArubaMM1) [mynode] #show controller sys-limits

Controller System Limits
------------------------
RAM: 8, CPU : 6
------------------------
System Name(Type)          : MM-VA-500(56)
Number of managed devices  : 50
(ArubaMM1) [mynode] #
Below output is from a Virtual Managed Device:
(ArubaMC-VA1) #show controller sys-limits

Controller System Limits
------------------------
RAM: 4, CPU : 3
------------------------
System Name(Type)          : MC-VA-32(51)
Number of CAPS             : 32
Number of RAPS             : 128
Number of USERS            : 512
Cluster Size               : 12
Number of L3 interfaces    : 128
Number of DHCP leases      : 512
Number of routes           : 131
Number of vlans            : 128
Number of Static routes    : 131
Session table              : 32768
Bridge table               : 16384
Tunnel table               : 2048
Station table              : 512
User table                 : 1024
Internal User table        : 300
IP Multicast table         : 256
Route-cache table          : 8192
Route table                : 1024                  
Null Route table           : 64
(ArubaMC-VA1) #

Note: This command is not supported in Hardware platform.

Version history
Revision #:
2 of 2
Last update:
‎02-28-2018 01:19 AM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: