Controller Based WLANs

Product and Software: This article applies to all controllers and ArubaOS 2.3 and above.

The error-rate-wait-time parameter is used for ARM configuration. This parameter defines the time for which the error threshold has to be exceeded to trigger an AP channel change.

Global configuration mode command:

(Aruba5000) (config) #arm error-rate-wait-time < 1 - 2147483647 >

- The unit for this parameter is seconds.

- The value can range from 1 - 2147483647.

- The default value is 30 secs in ArubaOS 3.X, and it is '0' in 2.X which means disabled.