Will an Aruba-12x AP change its power level when it is supplied with more power?

Aruba Employee

Product and Software: This article applies to ArubaOS 3.3.1.x and later.

 

The Aruba AP-12x supports three power profiles. Depending on the power profile, the major difference is the ability to support the second GE interface.

 

Power Profile #1 above 48.5V

Power Profile #2 45.1V - 48.5V

Power Profile #3 37V - 45.1V

 

powerchard.png

 

Switch vendors are starting to increase the capacity of their redundant power supplies to increase the voltage. When the voltage is increased, the power profile will not change profiles. If a power supply fails, the power profile will change, and the second GE interface may shut down. This is the expected behavior. The APs are not expecting an increase in the voltage output.

 

To take advantage of the increased output, the access point will need to be reset

Version history
Revision #:
1 of 1
Last update:
‎07-06-2014 07:29 AM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.