Question : How to enable 802.11K&V support on IAP 4.1
Environment : Clients on specific environment that supports 802.11k &v.
Answer :
802.11k: better handover performance in a multi-AP environment
• Requesting and reporting radio measurements
• Performing radio measurements on supported channels
• Providing information about neighbor AP’s
802.11v: extends radio measurements
• BSS Transition Management Request frames to the 11k clients when better AP is identified for a client by client match
Note:- Client match should be enabled for the functionality of 802.11k & 802.11 v
WEBUI
======
Network wizard>SSID>Security tab
CLI
===
6c:f3:7f:c3:66:2e (config) # wlan ssid-profile longetivity-test
6c:f3:7f:c3:66:2e (SSID Profile "longetivity-test") # dot11k
6c:f3:7f:c3:66:2e (SSID Profile "longetivity-test") # dot11v
6c:f3:7f:c3:66:2e (SSID Profile "longetivity-test") # end
6c:f3:7f:c3:66:2e# commit apply
committing configuration...
configuration committed.
Show commands
===============
6c:f3:7f:c3:66:62# show ap dot11k-stat 70:11:24:56:02:72
Beacon Report Requests Sent : 1
Beacon Reports Received : 1
Neighbour Report Requests Received : 1
Neighbour Reports Sent : 1
Neighbour Report Request Errors : 0
6c:f3:7f:c3:66:62# show ap dot11k-beacon-report 70:11:24:56:02:72
Client: 70:11:24:56:02:72
Status: Success
Nbr count: 4
Last recieved: 9s
Client 11k Beacon Report
------------------------
BSSID Channel RSSI Antenna
----- ------- ---- -------
6c:f3:7f:b6:69:32 36 92 0
6c:f3:7f:4a:43:d2 40 95 0
6c:f3:7f:b6:66:32 48 92 0
6c:f3:7f:b6:62:f2 44 93 0
6c:f3:7f:c3:66:2e# show ap dot11k-nbrs
Radio: 0
Nbr count: 3
11k Neighbours
--------------
BSSID Channel Last Update
----- ------- -----------
6c:f3:7f:4a:43:d0 40 7s
6c:f3:7f:b6:66:30 48 3s
6c:f3:7f:b6:69:30 36 19s
Radio: 1
Nbr count: 3
11k Neighbours
--------------
BSSID Channel Last Update
----- ------- -----------
6c:f3:7f:4a:43:c0 6 3s
6c:f3:7f:b6:66:20 6 8s
6c:f3:7f:b6:69:20 5 6s
